Precision scales for laboratories
| Model | Capacity g. | Readability e =< | Metric Verification Division d = | Platemm | Dimensions mm |
|---|---|---|---|---|---|
| LBTHB | 600g | 0,01g | Not approved | Ø 120 | 180x220x85h |
| LBTHB | 3000g | 0,05g | Not approved | 125x145 | 180x220x85h |
| LBQHW6 | 6kg | 0,1g | Not approved | 225x300 | 320x340x125h |
| LBQHW30 | 30kg | 0,5g | Not approved | 225x300 | 320x340x125h |
Available accessories
- Thermal printer Sprint For printing on 56 mm. roll
- TMU200 Printer Dot matrix, 70 mm. roll
- INTERNAL RECHARGEABLE BATTERY
- Calibration report release
Important Notes
Since the force of the earth's gravity is not the same everywhere, each scale must - according to the emphasised physical principle of weight - be corrected to compensate for gravity at each location. This adjustment process known as calibration must be performed upon initial installation and after each move WITH A WEIGHT IN CLASS M1 or HIGHER.
In case you do not have one, we recommend that you purchase a suitable weight to make the scale absolutely accurate, once at the location of the installation.
- Chromed brass calibration weight g.200 calibrated in M1 class for scale Mod.LBTHB600
- Calibration weight in chromed brass of g.1000 calibrated in M1 class for Mod.LBTHB3000 scale
- Calibration weight in chromed brass of g.2000 calibrated in M1 class for Mod.LBQHW6 scale
- Calibration weight in cast iron from g.10000 calibrated in M1 class for Mod.LBQHW30 scale