Model	Capacity	Division	Plate left mm	Plate right mm
B720	500g	0,05g	100	120
B727	1000g	0,1g	100	120

To weigh precious stones, gold and silver with the guarantee to meet the required standards.

SUITABLE FOR COMMERCIAL TRANSACTIONS FOR DIRECT SALE TO THE PUBLIC

Model	Capacity	Reading Division	Metric Verification Division	Platemm
VLC2 600	600 g	0,01 g	0,1 g	128x128
AS220R2	220g/1100ct	0,0001g/0,0005ct	0,001g/0,005ct	Ø 100
PSR2-600	600g	0,001	0,01	128 x 128
PSR2-1200	1200g	0,01g	0,1g	195 x 195
PSR2-4500	4500g	0,01g	0,1g	195 x 195
PSR2-6000	6000g	0,01g	0,1g	195 x 195
ADDITIONAL DISPLAY WITH 1.5 M CABLE
STAINLESS STEEL PLATE MM. 246 X 222 X H.MM. 42_42
CONNECTION CABLE TO PC/PRINTER LONG.MM. 1500

Technical features

Sistema SCS self calibration system, self-calibrating in the place of use, the scale self-calibrates every time factors (temperature, gravity acceleration) different from the standard ones occur.

These scales have an inside motorised weight which re-calibrates according to the place of use so they will always be accurate no matter where you use them (ex.: the scales can be used in Milano but if the customer went to Rome the scales would always weigh correctly and it will not need a new periodic check).

• Backlit LCD display with 13mm digits
• Included programs: counting - percentage weighing - 3 units of measure
• RS232 data output included for data transfer to PC or printer
• Automatic selection for scale stability
• Auto standby mode
• Automatic zero correction

Precision scales for laboratories

Model	Capacity g.	Readability e =	Metric Verification Division d =	Platemm	Dimensions mm
LBTHB	600g	0,01g	Not approved	Ø 120	180x220x85h
LBTHB	3000g	0,05g	Not approved	125x145	180x220x85h
LBQHW6	6kg	0,1g	Not approved	225x300	320x340x125h
LBQHW30	30kg	0,5g	Not approved	225x300	320x340x125h

Available accessories

• Thermal printer Sprint For printing on 56 mm. roll
• TMU200 Printer Dot matrix, 70 mm. roll
• INTERNAL RECHARGEABLE BATTERY
• Calibration report release

Important Notes

Since the force of the earth's gravity is not the same everywhere, each scale must - according to the emphasised physical principle of weight - be corrected to compensate for gravity at each location. This adjustment process known as calibration must be performed upon initial installation and after each move WITH A WEIGHT IN CLASS M1 or HIGHER.

In case you do not have one, we recommend that you purchase a suitable weight to make the scale absolutely accurate, once at the location of the installation.

• Chromed brass calibration weight g.200 calibrated in M1 class for scale Mod.LBTHB600
• Calibration weight in chromed brass of g.1000 calibrated in M1 class for Mod.LBTHB3000 scale
• Calibration weight in chromed brass of g.2000 calibrated in M1 class for Mod.LBQHW6 scale
• Calibration weight in cast iron from g.10000 calibrated in M1 class for Mod.LBQHW30 scale